Cast iron materials, primarily gray cast iron and ductile iron, remain in use for diesel engines and some gasoline engines. In recent years, the usage of compacted graphite iron (CGI) has also been steadily increasing.
-
-
- Watch Case
- Lens Ring
- Industrial Lens Mount
- Joint Components - Femoral Part
- Joint Components - Tibial Tray
- Joint Components -Femoral Stem
- Trauma Components - Bone Plate
- Cervical Spine Components - Pedicle Screw Dovetail Head
- Joint Components - Acetabular Cup Machining Solution
- Joint Components - Femoral Cap
Tooling Solutions for Cast Iron Cylinder Block Machining
Finish Milling of Flat Surfaces
Face Milling Cutter AFF40-LN12/LN15
Close-pitch design with 40° lead angle.
Negative inserts with 16 effective cutting edges per cutter for high cost-effectiveness.
All tool bodies undergo black oxide treatment for an attractive appearance and corrosion resistance.
Face Milling Cutter AFF40-LN12/LN15
Drilling
Solid Carbide Internal Coolant Drill D106 Series
Composite nano-multilayer coating provides exceptional wear resistance and outstanding toughness.
Available in 3xD and 5xD lengths.
Solid Carbide Internal Coolant Drill D106 Series
Side Boss Milling
1.APE90-LN09/LN13
2.ASM90-LN09/LN13
3.ASM90-WN08
4.AFM88-SN12
5.ASM90-LN12
Vertical insert mounting with helical edge geometry.
High-precision internal coolant design for each insert.
APE90 tangential tooth arrangement for high cutting load capacity and excellent safety.
APE90-LN09/LN13
Rough Machining of Combustion Chamber Faces and Oil Pan End Faces
1. AFM45/75/88-SN12
2. AFM45-XN07/09
3. AFM45-XN09-W
Tool body diameter range: D63-250mm.
XNMF 09 wedge-locked inserts for secure clamping.
Available with AC301K/AP251K grades specifically for cast iron machining.
AFM45-XN09-W
